yb-620 (LED)   – a mortise electric lock for access control syste

brand   yli electronic

The electric lock is designed for internal installation in both the door box (frame) and directly at the doo Suitable for metal, plastic, plastic and trees ' yan door

equipped with built -in   closure delays   0 | 3 | 6 | or 9 se (switched with jumpers on the lock

What is an electric lock

Electrical Castle   – Doors closure device that is controlled by power suppl Door clothing is carried out by sliding crossbar (metal rod), which is included in the appropriate par

How is YB-620 (LED) Electrical Castle

When closing the door, built into the castle, the gerk reacts to the magnet in the appropriate bar and closes the contact of the solenoid that puts the rige

In case of power outage the lock is in a closed state (stigma put forward

The lock is opened by the control contact (orange wire

where the electric lock is used

in automated control and control systems access in offices, business centers, shops and any other premise

The technical characteristics of the YB-620 (LED) electrical lock

Type of lock:   electricity

Type of installation:   cut

Defense:   2000 kg

Delay timer:   0 | 3 | 6 | 9

without power:   closed

Power:   12V

Consumption:   1000ma   (work)

Dimensions:

• Castle:   150x36x57 mm
• appropriate bar:   150x36x3 mm
• rigel:   diameter 20 mm, length 15 mm   (straight)

built -in doors and lock state

equipment

• Electric Castle
• Castle pad
• appropriate bar
• Mounting kit
• fasteners for a hollow metal box
• Instruction
• Key cylinder, keys (5pcs), cylinder pad

Installation of electrical lock   yb-620 (LED)

1. Set up a delay timer (switching on lock
2. Make a niche in the door box/ door by the size of the lock and the corresponding strap, then install the lock flush with the surface ( to install the lock in the hollow metal door box, use special mounting lining from the kit ll>
3. Attach the lining on the lock and secure the screw
4. Set the appropriate bar so that the built -in magnet (plastic circle) is below the loc The distance between the lock and the corresponding bar must be no more than 8 m
5. According to the instructions, connect the YB-620 (LED) electrical lock to power and control devices of the access control syste