Indoor video surveillance kit, 2 MP, with 8 cameras

Indoor Video Surveillance Kit, 2 MP, includes an 8-channel Dahua DH-XVR4108C-I XVR video recorder with AI functions for video surveillance systems, 8 ATIS AMD-2MIR-20W/2.8 Lite MHD cameras, Full Energy BGP-125Lite 12 V/5 A power supply, 8 ATIS AB-Q130 (SP-BOX-130) junction boxes, 8 ATIS AL-200 UHD (pair) transceivers, ATIS L8 power splitter, 8 ATIS power connectors (female), 8 ATIS power connectors (male).

Purpose and Operation Principle

The video surveillance kit is designed to set up an effective indoor security surveillance system (home, apartment, office, etc.).

The camera image is transmitted to the video recorder via a cable (sold separately) in Full HD quality. The system allows viewing the camera's video image and, with the presence of a 3.5" SATA HDD (sold separately), recording everything happening in the protected area.

Video archives can be recorded continuously, on a schedule, or triggered by a built-in motion sensor. The recorded event archives can be stored for a month or longer, depending on the recording settings.

The video camera is equipped with infrared illumination, enabling surveillance even in complete darkness. The camera housing with IP54 protection reliably guards against moisture and withstands temperatures as low as -20°C.

The video surveillance system can be viewed through a monitor with VGA/HDMI input or a regular television. Control is done using a USB mouse.

The video recorder can also be remotely accessed via a local network and/or the Internet, allowing for discreet placement.

Technical Specifications of the DH-XVR4108C-I Video Recorder

• Functional features: Target type identification (human/vehicle)
• Number of channels: 8
• Recording speed: HD-CVI/TVI/AHD/CVBS - 1080p/720p@25fps
• Video compression: H.264; H.264+; H.265; H.265+
• Video outputs: VGA, HDMI
• Audio inputs/outputs: 1/1
• Interfaces: RJ-45(10/100M)
• Hard drive support: 1 SATA HDD up to 6 TB (3.5")
• Power supply: DC 12 V
• Power consumption: 7 W
• Dimensions: 204.6 x 210.9 x 45.6 mm
• Weight: 500 g

Technical Specifications of the AMD-2MIR-20W/2.8 Lite Camera

• Image sensor: 1/2.7" CMOS
• Resolution: 2 MP (1920x1080)
• Focal length: 2.8 mm
• Infrared illumination: 20 m
• Power supply: DC 12 V, 350 mA
• Protection rating: IP54
• Temperature range: -20°C to +50°C
• Dimensions: 90 x 80 x 80 mm
• Weight: 380 g

Technical Specifications of the BGP-125Lite 12 V / 5 A Power Supply

• Output: +12 V / 1.5 A, power connector
• Input: ~220 V, power cord with plug
• Operating temperature range: -10°C to +50°C
• Dimensions: 118 x 53 x 33 mm

Technical Specifications of the AB-Q130 (SP-BOX-130) Junction Box

• Opening for connecting 35 mm diameter plugs
• Surface mount
• Protection rating: IP-66
• Material: Waterproof impact-resistant plastic
• Dimensions: 130 x 130 x 50 mm

Technical Specifications of the ATIS AL-200 UHD (pair) Transceiver

• Transmission line cable type: UTP Cat 5e/6
• Coaxial line: BNC-M connector
• Impedance: 75 ohms
• UTP line: Screw terminal
• Bandwidth: 10 kHz...71 MHz
• Surge protection: No
• Interference protection: Up to 60 dB
• Protection against electrical discharges: Up to 2 kV
• Operating temperature: -20...+50°C
• Mean time between failures: 10,000 hours
• Housing material: ABS plastic

Technical Specifications of the ATIS L8 Power Splitter

• Connector: 2.1 mm
• Nominal operating voltage: DC 12-24 V
• Housing material: Plastic
• Operating current: ≤ 2 A
• Operating temperature: 0...+70°C

Technical Specifications of the ATIS Power Connector (Female) with Clamp

• Connector type: DC
• Connection type: Dry contact
• Housing material: Plastic
• Maximum voltage: 250 V
• Maximum current: 2 A
• Insulation resistance: Not less than 50 mΩ
• Contact resistance: Up to 0.02 Ω
• Operating temperature: -35...+85°C

Technical Specifications of the ATIS Power Connector (Male) with Clamp

• Connector type: DC
• Connection type: Dry contact
• Housing material: Plastic
• Maximum voltage: 250 V
• Maximum current: 2 A
• Insulation resistance: Not less than 50 mΩ
• Contact resistance: Up to 0.02 Ω
• Operating temperature: -35...+85°C