The 4-camera Indoor 2MP Video Surveillance Kit includes 4 AB-Q130 (SP-BOX-130) mounting boxes, 4 AL-200 UHD transmitter/receiver pairs, L5 power splitter, 4 female terminal connectors, and 4 male terminal connectors

Indoor Video Surveillance Kit 2MP includes a 4-channel Dahua DH-XVR4104C-I XVR recorder with AI functions for video surveillance systems, 4 ATIS AMD-2MIR-20W/2.8 Lite MHD cameras, Full Energy BGP-125Lite 12V/5A power supply, 4 ATIS AB-Q130 (SP-BOX-130) junction boxes, 4 ATIS AL-200 UHD (pair) transceivers, ATIS L5 power distributor, 4 ATIS female power connectors, and 4 ATIS male power connectors.

Purpose and Operation Principle

The video surveillance kit is designed to establish an effective security monitoring system indoors (house, apartment, office, etc.).

The camera's video feed is transmitted to the XVR recorder via a cable (sold separately) in Full HD quality. The system allows for viewing the camera's video feed and, with an HDD of 3.5 Sata (sold separately), recording all activities within the protected area.

The video archives can be recorded continuously, on a schedule, or triggered by a built-in motion sensor. The recorded event archives can be stored for a month or more, depending on the recording settings.

The camera is equipped with infrared (IR) illumination, allowing surveillance even in complete darkness. The camera's housing has an IP54 protection rating, ensuring resistance to moisture and tolerating temperatures as low as -20°C.

The video surveillance system can be viewed through a monitor with VGA/HDMI input or a regular television. Control is done using a USB mouse.

The XVR recorder can also be accessed remotely over a local network and/or the Internet, allowing discreet placement of the recorder.

Technical Specifications of DH-XVR4104C-I XVR Recorder

• Features: Target Type Detection (Human/Transport)
• Number of Channels: 4
• Recording Speed: HD-CVI/TVI/AHD - 1080N/720p@25fps, CVBS - 960h@25fps
• Video Compression: H.264; H.264+; H.265; H.265+
• Video Outputs: VGA, HDMI
• Audio Inputs/Outputs: 1/1
• Interfaces: RJ-45(10/100M)
• Hard Drive Support: 1 SATA HDD up to 6TB (3.5")
• Power Supply: DC 12V
• Power Consumption: 4W
• Dimensions: 204.6mm x 210.9mm x 45.6mm
• Weight: 470g

Technical Specifications of AMD-2MIR-20W/2.8 Lite Camera

• Sensor: 1/2.7" CMOS
• Resolution: 2MP (1920x1080)
• Focal Length: 2.8mm
• IR Illumination: 20m
• Power Supply: DC 12V, 350mA
• Protection Rating: IP54
• Operating Temperature Range: -20°C to +50°C
• Dimensions: 90mm x 80mm x 80mm
• Weight: 380g

Technical Specifications of BGP-125Lite 12V/5A Power Supply

• Output: +12V/1.5A, power connector
• Input: ~220V, power cord with plug
• Operating Temperature Range: -10°C to +50°C
• Dimensions: 118mm x 53mm x 33mm

Technical Specifications of AB-Q130 (SP-BOX-130) Junction Box

• Opening for 35mm connector
• Surface-mounted installation
• Protection Rating: IP-66
• Material: Waterproof impact-resistant plastic
• Dimensions: 130mm x 130mm x 50mm

Technical Specifications of ATIS AL-200 UHD (Pair) Transceiver

• Transmission Line Cable Type: UTP Cat 5e/6
• Coaxial Line: BNC-M connector
• Impedance: 75 Ohms
• UTP Line: Screw terminal connector
• Bandwidth: 10kHz...71MHz
• Surge Protection: No
• Interference Rejection: Up to 60dB
• Lightning Protection: Up to 2kV
• Operating Temperature: -20°C...+50°C
• Mean Time Between Failure (MTBF): 10,000 hours
• Housing Material: ABS plastic

Technical Specifications of ATIS L5 Power Distributor

• Connector: 2.1mm
• Nominal Operating Voltage: DC 12-24V
• Housing Material: Plastic
• Operating Current: ≤2A
• Operating Temperature: 0...+70°C

Technical Specifications of ATIS Power Connector (Female)

• Connector Type: DC
• Connection Type: Dry contact
• Housing Material: Plastic
• Maximum Voltage: 250V
• Maximum Current: 2A
• Insulation Resistance: ≥50mΩ
• Contact Resistance: Up to 0.02Ω
• Operating Temperature: -35...+85°C

Technical Specifications of ATIS Power Connector (Male)

• Connector Type: DC
• Connection Type: Dry contact
• Housing Material: Plastic
• Maximum Voltage: 250V
• Maximum Current: 2A
• Insulation Resistance: ≥50mΩ
• Contact Resistance: Up to 0.02Ω
• Operating Temperature: -35...+85°C