Access Control Kit No. 004

The Access Control Kit No. 004 includes: network controller, 2 readers, electromagnetic lock and its mounting bracket, door closer, 10 access cards, a battery, and a cable up to 50m: UTP twisted pair for internal use and FC power 2*1, as well as an electrical installation box 10x15mm - 2m.

OPERATING PRINCIPLE

The Access Control Kit is designed for organizing access control systems in offices, stores, warehouses, and other premises, as well as for time attendance recording of personnel. The devices included in the kit allow equipping dual-sided doors (for both entrance and exit control).

The system is based on the network access controller NDC F18IP, to which the readers and the executive device - electromagnetic lock - are connected.

The NDC F18IP (U-Prox IP400) processes information received from the readers and, using four relays, performs switching (unlocking/locking) of the electromagnetic lock. The controller can operate autonomously or as part of a network. Ethernet interface is used for connecting the access control system to the network.

An electromagnetic lock is used as the locking mechanism, which can be installed on metal, metal-plastic, wooden, and plastic doors, as well as narrow doors with the included mounting bracket.

Entrance and exit to the premises are provided with two readers using contactless EM-Marine standard cards.

The door closer from the kit automatically closes the door after people pass through.

The included battery serves as a backup power source for the controller.

KIT CONTENTS

1. Access Controller NDC F18IP (U-Prox IP400) - 1 piece.
2. Reader U-Prox mini - 2 pieces.
3. Electromagnetic Lock YM-280(LED)-DS - 1 piece.
4. Door Closer ATIS DC-603-OH Brown - 1 piece.
5. RFID Proximity Card EM-06(TK04) - 10 pieces.
6. Full Energy Battery FEP-127, 7Ah/12V - 1 piece.
7. Mounting Bracket MBK-280L for electromagnetic lock - 1 piece.
8. Twisted Pair Cable UTP 4*2*0.5-CU internal, 8 cores of 0.5 mm - 30 m.
9. Power Supply Cable FC 2 * 1, 2 cores of 1 mm - 10 m.
10. 10x15 Plastic Electrical Box - 2 pieces.

TECHNICAL SPECIFICATIONS

Network Controller NDC F18IP (U-Prox IP400)

• Controller Type: Network
• Connection Type: Wired
• Number of Connectable Readers: 2 (Wiegand)
• Number of Access Points: 2
• 8 inputs for connecting circuits with current control (end resistor - 2 kΩ)
• 2 relays (contacts NO/NC/COM) 5A@24V
• 2 relays (contacts NO/COM) 1A@24V
• Memory: 31768 permanent identifiers + 1000 temporary
• Ports: USB, Ethernet 100Mbit
• Power Supply: DC 12V
• Operating Temperature: 0°C to +55°C

Reader U-Prox mini

• Installation Type: Internal
• Connection Type: Wired
• Supported Card/Key Fob Standards: EM-Marine / HID
• Operating Frequency: 125kHz
• Reading Range: 8cm
• Interfaces: Wiegand / Dallas Touch Memory / RS-232
• Power Supply: DC 4.75-16V
• Standby Current Consumption: 30mA
• Max. Current Consumption: 50mA
• Operating Temperature: -35°C to +60°C
• Housing Material: ABS plastic
• Dimensions: 80x45x12.5mm