ATIS Kit GSM 100 wireless alarm system with built-in keyboard

The wireless GSM alarm system ATIS Kit-GSM100 has 99 wireless and 2 wired zones.

Brand: ATIS.

The alarm center is equipped with a GSM module, which allows for immediate voice calls (6 dialing numbers) in case of an alarm, sending an "Assistance" alarm signal (3 numbers), and sending sms messages (3 numbers) to a mobile phone.

The installation (removal) of the alarm system, as well as its programming, is done using a remote control or a mobile phone.

The kit includes:

• control panel;
• wireless PIR motion detector ATIS-804DW;
• wireless magnetic contact ATIS-19DW;
• wired siren;
• radio remote control WBK-404C - 2 pcs;
• power supply unit.

WHERE IS ATIS Kit-GSM100 USED?

Thanks to a wide range of sensors included in the supply package (motion sensor, door opening sensor, smoke sensor, siren), the GSM alarm system ATIS Kit-GSM100 "out of the box" is ready to provide effective security for an apartment, house, cottage, garage, or office.

ADVANTAGES OF ATIS Kit-GSM100

• LED display with clock indication;
• 2 wired zones, 99 wireless zones can be installed in instant, 24-hour, delay, partial arming, scheduled arming, remote arming modes;
• 3 groups of scheduled arming and disarming;
• 6 phone numbers for emergency voice calls to the control panel and 3 numbers for SMS notifications;
• use of a mobile phone (DTMF commands or SMS messages) for central programming and remote control;
• intelligent programming system for wireless sensors, fully compatible with PT2262 standard;
• pre-recorded voice messages for accurate identification of sensor activation type, as well as the ability to record your own message on 10 wireless zones;
• use of mobile communication for arming/disarming and alarm settings;
• built-in lithium battery provides uninterrupted operation of the device in case of power failure (the system will notify via SMS message).

MAIN TECHNICAL CHARACTERISTICS

GSM Alarm System ATIS Kit-GSM100

• Number of wired zones: 2
• Number of wireless zones: 99
• Number of connected keyfobs: 8
• Number of users: 6
• Acoustic power of siren: 120 dB
• Power supply voltage: DC 5 V
• Backup power supply: lithium battery 4.2 V 350 mAh
• Current consumption: 300 mA

OPERATING PRINCIPLE OF ATIS Kit-GSM100

After programming and installing the wired and wireless sensors included in the kit, set the GSM alarm system to guard mode using a keyfob or mobile phone.

If one of the sensors is triggered (depending on the system settings), the Central unit will sequentially call the phone numbers programmed to receive alarm calls, and will also send an SMS message to the recipients of alarm messages.

Upon receiving an incoming call from the GSM central unit, a pre-recorded voice message about the event will be played, and a list of possible remote actions will be offered:

• arm/disarm;
• activate voice message transmission (activate the central unit speaker);
• turn off further calls and SMS transmission to other subscribers.