Quantity
|
Out of stock
|
||
|
YS-132NO (power open) - mortise electromechanical latch with a long bar. Holding force up to 500 kg.
The electric fastener is intended for installation on PVC, metal-plastic or wooden doors.
Brand: Yli Electronic
What is an electromechanical clasp?
An electromechanical latch is a matching part with a mechanical catch for a conventional mechanical lock or door handle with a tab. A non-pressure handle is installed on the outside of the door.
How the YS-132NO (power open) electromechanical latch works
When powered by an access control device (e.g., exit button, reader, radio controller, etc.), the electric latch release releases the extended bolt of the mechanical lock, allowing the door to be opened without pressing the handle or turning the key.
When the door is returned to the closed position, the latch of the electromechanical latch is locked, thereby holding the bolt of the lock in the locked position.
To avoid failure of the lock coil, the continuous time of voltage supply should not exceed 3 seconds.
Where an electromechanical clasp is used
An electromechanical latch is widely used as part of a simple access control and control system (ACC). It is installed on metal, plastic, metal-plastic or wooden doors in offices, banks, business centers, hotels or other premises.
Technical characteristics of the electromechanical fastener YS-132NO (power open)
Installation type: recessed
Holding force: 500 kg
Adjustment of the latch position: mechanical
Door open mode: Mechanical switch
Powered: Disabled
Power supply: DC12V
Consumption: 200mA
Dimensions: 250x25x31mm