atis lock ssm   – Universal invoice   stainless steel electromechanical lock   for internal or external installation with additional protection of the lock output butto Designed for metal or trees ' jar door The type of installation in the direction of door closure: left / righ The kit is added 5 key   key type - toothed

What is an electromechanical lock

Electromechanical lock   - closing a device with a mechanical crossbar, which is decomposed by electrical supply, or mechanically – key/butto

How the electromechanical lock

works   atis lock ssm   the following ways:

• >
• >   Outward – using   key
• inside – Using the built -in   mechanical buttons
• remotely   – the voltage with a 12V (max voltage time - no more than 1 se)

To avoid collecting the lock coil continuous voltage time should exceed 3 second

is used in simple access control systems, for example, on wickets of private homes, in apartments, schools, shops, hotels, offices, warehouse Due to the entire stainless steel body type, the lock is suitable for both internal and external installation

Specifications   atis lock ssm

• material Corps:   stainless steel
• Type of installation:   invoice
• Power:   12V
• Consumption Current:   2a
• Working temperature:   from -30 & Deg; To +70 & Deg; C
• Dimensions:   160x105x37 mm
• Weight:   1300 g < /ll>

Equipment

• Electromechanical Castle
• The corresponding part
• Conduct with a mounting ring
• Clamping plate
• /l>
• 5 keys
• Instruction

Installing the Atis Lock SSM electromechanical lock

1. Install and fasten the core (D = 27mm) with the mounting ring on the door using the clamp
2. tune the bar Depending on the thickness of the door
3. , remove the lock cover by unscrewing two screws on the end, and secure the lock on the door using the 4th mounting holes
4. set the appropriate part, withstanding the distance between the lock and a corresponding bar of 5mm
5. if necessary adjust the effort of the platoon spring of the lock
6. connect the power

to unlock an electromechanical lock using a video intercom without using a separate power supply to the lock – We recommend using   BCZ   ( purchased separately

left/right installation According to the direction of closing the door (left / right), it is necessary to remove the lid of the lock, remove the splint from the opening of the axis of the locking crossbar, remove the washers, pull and return the crossbar to 180 & Deg Secure everything in reverse sequenc radio controllers, exit buttons and other access control device