atis lock mb   – Universal invoice   electromechanical steel electromechanical lock   for internal installation with additional protection of the lock output butto Designed for metal or trees ' jar door The type of installation in the direction of door closure: left / righ The set is added 5 key
Type of key - toothed

What is an electromechanical lock

electromechanical lock   - a closing device with a mechanical cross by electrical supply, or mechanically – Key/butto

How the electromechanical lock

works out the lock   atis lock mb   the following ways:

outside – using   key
• inside – Using the built -in   mechanical buttons
• remotely   – the voltage pulse 12 in from the power supply or controller network

To avoid collecting the lock coil, continuous voltage supply time should exceed 3 second Access control, for example, in apartments, schools, shops, hotels, offices, warehouse Made of painted steel, the lock is only suitable for indoor installatio /

• Installation type:   invoice
• Power:   12 in
• consumption:   ; 2 A
• Working temperature:   from -30 & Deg; To + 70 & Deg; C
• Dimensions:   160 x 105 x 37 + 10 mm button
• Packaging dimensions:   170 x 107 x 85 mm
• weight:   1300 g

Installing the electromechanical lock atis lock mb

1. install and fasten the core (d = 27 mm) with the mounting ring on the door, using the clamping plate
2. tuning Depending on the thickness of the door
3. , remove the lock cover by unscrewing the two screws on the end, and secure the lock on the door using the 4th mounting holes
4. set the appropriate part, withstanding the distance between Castle and corresponding bar 5 mm
5. if necessary adjust the effort of the platoon spring of the lock
6. connect the power

to unlock an electromechanical lock using a video intercom without using a separate power supply to the lock – We recommend using   BCZ   ( purchased separately

left/right installation According to the direction of closing the door (left / right), it is necessary to remove the lid of the lock, remove the splint from the opening of the axis of the locking crossbar, remove the washers, pull and return the crossbar to 180 & Deg Secure everything in reverse sequenc , radio controllers, exit buttons and other access control device