atis lock g   – Universal invoice   electromechanical lock made of painted metal   for internal installatio Castle   gray Designed for metal or trees ' jar door Type of installation in the direction of door closure: left/righ

is unlocked The kit is added 5 key  

What is an electromechanical lock

Electromechanical Castle  - Closing device with a mechanical crossbar performed by electrical supply, or mechanically – key/butto

How the electromechanical lock

works   atis lock g   the following ways:

• can Outward – using   key
• inside – Using the built -in   mechanical buttons
• remotely   – The voltage pulse is 12V (MAX voltage time - no more than 1 se)
• mode & laquo; detached & raquo;   – Squeezing the Unit and turning the key to the stop - the lock will be constantly unlocked

To avoid collecting the lock coil continuous voltage time should exceed 3 second

is used in simple access control systems, for example, in apartments, schools, shops, hotels, offices, warehouse Castle   atis lock g   designed solely for   internal installatio

Specifications   atis lock g

• Corps material:   chrome metal
• The material of the relevant part:   chrome metal, with stainless steel lining
• Type of installation:   invoice
• Power:   12V
• Consumption Current:   ; 2a
• Working temperature:   from -30 & Deg; To +70 & Deg; C
• Dimensions:   160x105x37 mm
• Weight:   1300 g < /ll>

Equipment

• Electromechanical Castle
• The corresponding part
• Conduct with a mounting ring
• Clamping plate
• /l>
• 5 keys
• Instruction

Installing the electromechanical lock atis lock g

1. install and fasten the core (D = 27mm) with the mounting ring on the door using the clamping plate
2. tuning the bar Depending on the thickness of the door
3. , remove the lock cover by unscrewing two screws on the end, and secure the lock on the door using the 4th mounting holes
4. set the appropriate part, withstanding the distance between the lock and a corresponding bar of 5mm
5. if necessary adjust the effort of the platoon spring of the lock
6. connect the power

to unlock an electromechanical lock using a video intercom without using a separate power supply to the lock – We recommend using   BCZ   ( purchased separately

left/right installation According to the direction of closing the door (left / right), it is necessary to remove the lid of the lock, remove the splint from the opening of the axis of the locking crossbar, remove the washers, pull and return the crossbar to 180 & Deg Secure everything in reverse sequenc radio controllers, exit buttons and other access control device