Quantity
|
Out of stock
|
||
|
atis lock b – Universal invoice electromechanical lock made of painted metal for internal installatio Castle brown Designed for metal or trees ' jar door Type of installation in the direction of door closure: left/righ
is unlocked The kit is added 5 key
What is an electromechanical lock
Electromechanical Castle - Closing device with a mechanical crossbar performed by electrical supply, or mechanically – key/butto Outward – using key
- inside – Using the built -in mechanical buttons
- remotely – The voltage pulse is 12V (MAX voltage time - no more than 1 se)
- mode & laquo; detached & raquo; – Squeezing the Unit and turning the key to the stop - the lock will be constantly unlocked
To avoid collecting the lock coil continuous voltage time should exceed 3 second
is used in simple access control systems, for example, in apartments, schools, shops, hotels, offices, warehouse Castle atis lock b designed solely for internal installatio
Specifications atis lock b H2>
- Corps material: painted metal
- The material of the relevant part: painted metal, with stainless steel lining
- Type of installation: invoice
- Power: 12V
- Consumption Current: ; 2a
- Working temperature: from -30 & Deg; To +70 & Deg; C
- Dimensions: 160x105x37 mm
- Weight: 1300 g < /ll>
Equipment
- Electromechanical Castle
- The corresponding part
- Conduct with a mounting ring
- Clamping plate
- /l>
- 5 keys
- Instruction
Installing the electromechanical lock atis lock b
- Install and fasten the core (D = 27mm) with the mounting ring on the door using the clamping plate
- tuning the bar Depending on the thickness of the door
- , remove the lock cover by unscrewing two screws on the end, and secure the lock on the door using the 4th mounting holes
- set the appropriate part, withstanding the distance between the lock and a corresponding bar of 5mm
- if necessary adjust the effort of the platoon spring of the lock
- connect the power
to unlock an electromechanical lock using a video intercom without using a separate power supply to the lock – We recommend using BCZ ( purchased separately
left/right installation According to the direction of closing the door (left / right), it is necessary to remove the lid of the lock, remove the splint from the opening of the axis of the locking crossbar, remove the washers, pull and return the crossbar to 180 & Deg Secure everything in reverse sequenc radio controllers, exit buttons and other access control device