Quantity
|
Out of stock
|
||
|
ym-280is (LED) – The overhead electromagnetic lock with an IR traffic, a delay timer of 9 sec, LED indication, a sensor of the lock of the lock with the retention of up to 280 kg There are dry contacts to determine the status of the lock (no, nc, com
manufacturer yli electronic
Designed for internal installation on metal, glass, trees ' yani and fire door
What is an electromagnetic lock
Magnetic or electromagnetic lock – Door closing device, the principle of which is based on magnetic interactio Consists of an electromagnet housing and a corresponding metal of metal with high magnetic permeabilit
How does the YM-280is electromagnetic lock (LED)
workthe electromagnetic lock is mounted on the door box, the corresponding bar – on the doo When supplying (DC12V/DC24V) – The castle admits the appropriate bar, securely closing the doo In the absence of power – The castle is unlocked, which meets the fire safety requirement
To compensate for the impact when closing the door on the appropriate bar provided a rubber gaske
where the electromagnetic lock
is usedElectromagnetic locks used as executive devices in access control and control systems (SKUD Most often they are installed on the front door in under ' rides, offices, banks, business centers, et premise
The technical characteristics of the YM-280IS electromagnetic lock (LED)
Defense: 280 kg
delay time: 3,6,9 sec
Indication: LED
IR Sensor detection range: 3 m
Corps material: anodized aluminum
the material of the relevant part: zinc
Power: DC12V | DC24V (switch to the lock)
Consumption: 12V/520ma | 24V/260ma
Dimensions:
- Fastener lock: 283 x 48 x 39 mm ;
- appropriate bar: 180 x 38 x 13 mm
YM-280IS (LED)
- Electromagnetic lock with fastener bar
- The corresponding part
- Mounting kit
- mounting sticker with marking
- Instruction
Electromagnetic lock
appropriate bar
- Paste a stencil at the place of installation of the appropriate part on the door;
- From the outer part of the door drill a hole d = 16mm (according to the instructions, but not to the end!), And two shallow holes d = 8mm in the inside of the door to fix the corresponding strap;
-
Secure the appropriate part by installing a bolt with a semicircular smooth head on the outside of the doo Put the rubber gasket on the inside and install the appropriate part on i Secure the nut with a hexagonized key
Important! do not tighten the nuts of the appropriate bar – It should be slightly springy thanks to a rubber gasket, to ensure denser contact of the corresponding bar and magne
Fastener Castle
Secure the fastener of the electromagnetic lock in the upper corner of the box using the screws from the se
Electromagnetic Castle
Attach the electromagnetic lock to the fastener and screw in two screws (bottom of the lock) with a small hexagonal ke
Power connection
Connect electromagnetic lock to power:
- (+) to red wire;
- (-) to black
Compatibility
Electromagnetic Castle YM-280IS (LED) compatible with code keyboards, readers, exit buttons, with audio training and video intercoms of all types and other access control device