ym-180n (LED)   – LED electromagnetic lock and a lock of the lock with the retention   up to 180 kg   to brea There are dry contacts to determine the status of the lock (no, nc, com

manufacturer   yli electronic

Designed for internal installation on metal, plastic, plastic, trees ' yal door

What is an electromagnetic lock

Magnetic   or   electromagnetic lock   – Door closing device, the principle of which is based on magnetic interactio Consists of an electromagnet housing and a corresponding metal of metal with high magnetic permeabilit

How is the YM-180n electromagnetic lock (LED)

the electromagnetic lock is mounted on the door box, the corresponding bar – on the doo When supplying (DC12V/DC24V) – The castle admits the appropriate bar, securely closing the doo In the absence of power – The castle is unlocked, which meets the fire safety requirement

To compensate for the impact when closing the door on the appropriate bar provided a rubber gaske

where the electromagnetic lock

is used

Electromagnetic locks   used as executive devices in access control and control systems (SKUD Most often they are installed on the front door in under ' rides, offices, banks, business centers, et premise

The technical characteristics of the YM-180n electromagnetic lock (LED)

Holding:   180 kg

Indication:   LED

Corps material:   anodized aluminum

the material of the relevant part:   zinc

Power:   DC12V | DC24V   (switch to the lock)

Consumption:   12V/400ma | 24V/200ma

Dimensions:

• Fastener lock:   185x48x24 mm ;
• appropriate bar:   130x33x3 mm

YM-180N (LED)

• Electromagnetic lock with fastener bar
• The corresponding part
• Mounting kit
• mounting sticker with marking
• Instruction

Electromagnetic lock

appropriate bar

• Paste a stencil at the place of installation of the appropriate part on the door;
• From the outer part of the door drill a hole d = 16mm (according to the instructions, but not to the end!), And two shallow holes d = 8mm in the inside of the door to fix the corresponding strap;

• Secure the appropriate part by installing a bolt with a semicircular smooth head on the outside of the doo Put the rubber gasket on the inside and install the appropriate part on i Secure the nut with a hexagonized key

  Important!   do not tighten the nuts of the appropriate bar – It should be slightly springy thanks to a rubber gasket, to ensure denser contact of the corresponding bar and magne

Fastener Castle

Secure the fastener of the electromagnetic lock in the upper corner of the box using the screws from the se

Electromagnetic Castle

Attach the electromagnetic lock to the mounting strip and screw in two screws (bottom of the lock) with a small hexagonal ke

Power connection

Connect electromagnetic lock to power:

• (+) to red wire;
• (-) to black