ym-180m-s   – A mortise electromagnetic lock with a lock sensor with a retention of   up to 180 kg   to brea There are dry contacts for determining the status of the lock (no/nc/com

brand:   yli electronic

intended for internal installation on metal, Plastic, plastic, trees ' yana door   – Door closing device, the principle of which is based on magnetic interactio It consists of a housing with electromagnet and a corresponding metal with high magnetic permeabilit on the doo When supplying (DC12V/DC24V) – The castle admits the appropriate bar, securely closing the doo In the absence of power – The lock is unlocked, which meets the fire safety requirement Electromagnetic locks   used as executive devices in access control and control systems (SKUD Most often they are installed on the front door in under ' rides, offices, banks, business centers, et premise Status):   no/nc/com

Corps material:   anodized aluminum

material of the corresponding part:   zinc

power:   dc12V | DC24V   (switching on the lock)

Consumption:   12V/300ma | 24v/150ma

Size:

• Fastener Castle:   190 x 32 x 25 mm ; >
• appropriate bar:   130 x 33 x 10 mm

Installation of an electromagnetic lock

The corresponding bar

• paste the stencil at the place of installation of the appropriate part on the door;
• from the outside of the door Drill the hole D = 16mm (according to the instructions but not to the end!), and two shallow holes d = 8mm in the inside of the door to fix the corresponding strap;

• secure the corresponding part by installing the bolt with A semicircular smooth head on the outside of the doo Put the rubber gasket on the inside and install the appropriate part on i Fix the nut with a hexagonized key

  Important! It should be slightly springy thanks to a rubber gasket, to ensure denser contact of the corresponding bar and magne