Quantity
|
Out of stock
|
||
|
ym-180m – A mortise electromagnetic lock with a retention up to 180 kg on a brea For internal installation on metal, plastic, plastic, trees ' door electromagnetic lock – Door closing device, the principle of which is based on magnetic interactio It consists of a housing with electromagnet and a corresponding metal with high magnetic permeabilit on the doo When supplying (DC12V/DC24V) – The castle admits the appropriate bar, securely closing the doo In the absence of power – The lock is unlocked, which meets the fire safety requirement Electromagnetic locks used as executive devices in access control and control systems (SKUD Most often they are installed on the front door in under ' rides, offices, banks, business centers, et premise b> anodized aluminum
material of the corresponding part: zinc
power: dc12V | DC24V (switching on the lock)
Consumption: 12V/300ma | 24v/150ma
Size:
- Fastener Castle: 190 x 32 x 25 mm ; >
- appropriate bar: 130 x 33 x 10 mm
YM-180M
- Electromagnetic lock with a mounting bar
- relevant part
- mounting kit
- Instruction
Installation of an electromagnetic lock
The corresponding bar
- paste the stencil at the place of installation of the appropriate part on the door;
- from the outside of the door Drill the hole D = 16mm (according to the instructions but not to the end!), and two shallow holes d = 8mm in the inside of the door to fix the corresponding strap;
-
secure the corresponding part by installing the bolt with A semicircular smooth head on the outside of the doo Put the rubber gasket on the inside and install the appropriate part on i Fix the nut with a hexagonized key
Important! It should be slightly springy thanks to a rubber gasket, to ensure denser contact of the corresponding bar and magne
Fastener lock
Fasten the fastener of the electromagnetic lock in the upper corner of the box using the screws from the ki
Electromagnetic lock
Lock to the mounting strip and screw in two screws (bottom of the lock) with a small hexagonal ke (+) to red wire;
- (-) to black
Compatibility
Electromagnetic Castle YM-180M compatible with code keyboards, readers, exit buttons, with audiophone and video domOmphoms of all types and other control devices acces